Test a wide range of UTP cables such as 10Base T , 100Base Tx , 10Base 2 (Coax), 356A , TIA-568A , TIA-568B, etc. Can tests for wiring faults such as open, short , reversed , crossed and split wires. Can identify up to 4 different cables at one end by provided remote identifiers. Double digital 14-segment LED and 4 pair LEDs clearly display the fault status. Provided over voltage (max.56V) protection to prevent damage frommiss connecting to live circuit of networking. Simple and effective use. Auto power off
Display/LEDs
Double digital 14-segment LED Four FAIL (red) LEDs Four Pass (green) LEDs
Connector
RJ45, BNC
Cable pairs tested
1/2 , 3/6 , 4/5 , 7/8
Faults status
Open , Short , Reversed , Crossed , Split and Low Battery
Test cable length
Minimum : 1.2M (4ft) , Maximum : 150M (492ft)
Power
9Volt battery
Size
170 x 52 x 38mm
Weight
Approx. 180g
Environment Conditions
Operating : 0 ℃ to +50 ℃ Storage : -20 ℃ to +60 ℃
Accessories
Instruction manual, One patch cable (RJ-45 to RJ-45,30cm long) & One remote identifier #1(Optional for A #2, #3 & #4 ) (Optional for B #5, #6, #7 & #8)
