50 MHz to 3.5 GHz frequency range. For isotropic measurements of electromagnetic fields. Non-directional (isotropic ) measurement with three-channel measurement probe. High dynamic range due to three-channel digital results processing. Configurable alarm threshold and memory function. Easy to use
APPLICTIONS
High frquency (RF) electromagnetic wave field strength measurement.
Mobil phone base station antenna ratenna radiation power density measurement.
Wireless communication applications(CW , TDMA , GSM , DECT).
Wireless LAN(Wi-Fi) detection, installation.
Spy camera, wireless bug finder.
Cellular/Cordless phone radiation safety level.
Microwave oven leakage detection.
Personal living environment EMF safety.
RF power measurement for fransmitters.
SPECIFICATION:
ELRCTRICAL SPECIFICATIONS
Sensor type
Electric field (E)
Frequency range
50MHz to 3.5 GHz
Directional characteristic
Isotropic, 3-dimensional
Measurement range(CW signal>50MHz)
38mV/m to 11V/m
Absolute error(@1V/m and 50MHz)
± 1.0dB
Frequency response(taking into accountb typ.CAL factor)
± 1.0dB (50MHz to 1.9 GHz) , ±2.4dB(1.9GHz to 35GHz)
Isotropy deviation
Type. ±1.0dB 於 f>50 MHz
Overload limit
4.2W/m2 (40 V/m)
Temperature response(0 to 50 ℃)
± 1.5dB
Note
Unless otherwise stated, all specifications hold under the following assumptions:
Sinusoidal signals; device in far-field of a source; probe head pointing toward source;ambient temperature +23 ℃±3 ℃;relative air humidity 25% to 75%.
GENERAL SPECIFICATIONS
Measurement methd
Digital , triaxial measurement
Directional characteristic
Isotropic, triaxial
Measurement range selection
One continuous range
Display resolution
0.1mV/m, 0.1 μA/m, 0.01 μW/m2
Setting time
Typically 1s ( 0 to 90% of meas. value)
Display refresh rate
Typically 400mS
Display type
LCD 4 digit
Audible alarm
Buzzer
Measurement units
mV/m , V/m , μA/m , mA/m , μW/m2 , mW/m2
Measurement display value
Instantaneous measured value, maximum value or average value since power-on.
