Search: Phone:86-21-51087628 WeChat:13482459793

PRODUCTS
EMF Tester
Thermometer
Infrared Thermometer
Sound Level Meter
Humidity/Temperature Meter
Light Meter
Anemometer
CO Meter/ NDIR CO2 Meter
Particle Counter
PH Tester
Vibration Meter
Color Meter
3 Phase Power Analyzer
Multimeter
DC/AC Current Clamp Meter
Earth/Ground Tester
Calibrator
Insulation Tester
Lan Cable Tester
Battery Impedance Tester
Loop/PSC Tester
Power Analyzer
Power Clamp Meter
Power Supply/Inverter
Tachometer
Flexible AC Current Clamp
Printer
Solar Power Meter
Milli-Ohmmeter
Luminous Flux Meter
TES-3050H Digital DC/AC Clamp Meter
3-3/4 Digital LCD with bar-graph.
Auto-Ranging on Volt, Ohm, Current,
Frequency measurements.
Auto-power off.
Data Hold mode.
MAX/MIN Hold mode.
Zero Adjustment/Relative Reading.
PEAK Hold mode. (only ACV and ACA Range)
MEASUREMENT SPECIFICATIONS:

 

DC Current (Autorange & Manual)

 

RangeResolutionAccuracyOverload protection
400A0.1A±(2% + 5)1100A
1000A1A

 

Response time: 5 seconds max. to rated accuracy within selected range.

 

AC Current (Autorange & Manual): Low Pass Filter

 

RangeResolutionAccuracyOverload protectionFrequency Response
400A0.1A±(2% + 10)1100A40400 Hz
1000A1A

 

Conversion type: AC coupled,TRMS measurement.

 

Additional Crest Factor Errors (non - sinecure)

 

Crest FactorError (% of reading)
1 - 30.5%
3 - 53%
5 - 76%

 

Response time: 5 seconds max, to rated accuracy within selected range.

 

INFLUENCE OUANTITY

 

Influence quantityLimits of variationMeasured quantityTolerance
Position of conductor in the clamp conductor’s diameter: 20mmIn relation to the centerAmps±(1%+5)

 

 DC Voltage (Autorange & Manual)

 

RangeResolutionAccuracyInput ImpedanceOverload protection
400mV0.1mV ≒ 11MΩ600Vrms
4V0.001V±(0.75% + 2)≒ 10MΩ
40V0.01V
400V0.1V
600V1V

 

Response time: 3 seconds max. to rated accuracy within selected range.

 

AC Voltage (Autorange & Manual): Low Pass Filter

 

RangeResolutionAccuracyInput impedanceOverload protectionFrequency Response
50~60Hz400Hz
4V0.001V±(1.2% +5)±(2.5% +10)≒11MΩ600Vrms40 400 Hz
40V0.01V≒10MΩ
400V0.1V
600V1V±(1.5% +5)±(3% +10)

 

Conversion type: AC coupled,TRMS measurement.

 

Additional Crest Factor Errors (non - sinecure)

 

Crest FactorError (% of reading)
1 - 30.5%
3 - 53%
5 - 76%

 

Response time: 5 seconds max, to rated accuracy within selected range.

 

Frequency (Hz) (Autorange for Voltage)

 

RangeResolutionAccuracySensitivityOverload protection
100Hz0.01Hz±(0.1% + 2)100mV600Vrms
1KHz0.1Hz
5KHz0.001KHz

 

Frequency (Hz) (Autorange for Current)

 

RangeResolutionAccuracySensitivityOverload protection
100Hz0.01Hz±(0.5% + 5)5A1100A
1KHz0.1Hz

 

Resistance (Ω) (Autorange & Manual)

 

RangeResolutionAccuracyOpen circuit VoltageOverload protection
400Ω0.1Ω±(1% + 5)≦ 0.5 VDC600Vrms
4KΩ0.001KΩ±(1% + 3)
40KΩ0.01KΩ
400KΩ0.1KΩ
4MΩ0.001MΩ
40MΩ0.01MΩ±(1.5% + 3)

 

Audible continuity

 

RangeContinuity beeperOpen Circuit VoltageOverload  protection
≦ 40Ω≦ 0.5V600Vrms

 

Diode test

 

RangeResolutionAccuracyOverload protection
 2.000V0.001V±(1%+2)600Vrms

 

Max. open circuit Voltage: 3.2V

 

Max. short circuit Current: 1.0mA (typical).

 

Peak Hold Specifications

 

AC Voltage (Manual Range): Low Pass Filter

 

RangeResolutionAccuracy
(50Hz
60Hz)
Input ImpedanceOverload protection
4V0.001V±(2.5% + 10)≒ 11MΩ600Vrms
40V0.01V≒ 10MΩ
400V0.1V
600V1V

 

AC Current (Manual Range): Low Pass Filter

 

RangeResolutionAccuracy
(50Hz
60Hz)
Overload protection
400A0.1A±(2.5 % + 10)1100A
1000A1A

 

Peak Detect Acquisitions Time100ms

 

Peak Hold: storage of the peak value.

 SPECIFICATIONS:

  Numerical Display            3-3/4 digit liquid crystaldisplay (LCD) maximum reading 3999.

  Range Selection               All ranges are selected  by a single range switch.

  Over Range Indication       :LCD will show a "OL" flashing in the highest position

                                             accompanied with a continuous beeping.

                                              (except for ranges of 1000A AC/DC, and 600VDC 600VAC ).

 Low Battery Indication        :The  is displayed when the battery voltage drops below

                                              the operating voltage.

  Sampling Rate                  20 times/sec ( Barograph )    2 times/secDigital Display

  Power Source                   one 006p 9V or IEC 6F22  or NEDA 1604 Battery.

  Battery Life                        100hr approx. (Alkaline)

  Polarity                              Automatic polarity "  "  display for negative input.

  Auto power off time           Approx. 30 minutes 

  Operating Temperature       :0°C to 50°C(32°F to 122°F)  and Humidity  below 80%RH     

  Storage Temperature          :-10°C to 60°C(14°F to 140°F)   and Humidity below 70%RH     

  Dimensions                         :239(L)×66(W)×34(H)mm

  Weight                                 :Approx. 430g 

 Accessories                         :Instruction manual, Battery, Test leads,Carry Case.

LANGUAGUE
Home | About us | Sitemap | Products | Contact Us

Shanghai Zhongxuan Electronics Co.,Ltd.
TEL:86-21-51087628
WeChat:13482459793
E-mail:tes5200@126.com